It is inevitable that people will be confronted with the installation problem of embedded ceiling light. At this time, people usually feel at a loss when face the problem. Then, what we should do when we install the embedded ceiling light? What are those methods and precautions of installing embedded ceiling light? Next, Savelights will make a detailed introduction for you.
First, the installation process and method of installing embedded ceiling light.
The installation process of embedded ceiling light.
Firstly, we can punch a square or round hole on the installation position of ceiling.
We can punch a hole on the place where it needs to install an embedded ceiling light, then it is convenient for people to install the light. We should fix the position of ceiling light and the size of hole should be corresponded with the area of the ceiling.
Secondly, when we install the embedded ceiling light, we need to install the installation card on the two sides of the light. Then, we can install the the light into the square or round hole.
Thirdly, we can connect the wire and put the wiring cover stable and then twist the screw tightly.
The number of screw which used to fix the lamp holder should be not fewer than the number of fixed holes on the lamp holder. And the diameter of the screw should be corresponded with the diameter of hole. If there is no fixed hole on the lamp holder, then we need to punch the hole by ourselves. The screw for fixing the lamp holder should not be fewer than three. And the center of gravity of the light should be corresponded with the center of gravity of the screw.
Fourthly, we can put the light and fix it.
We need to press the reed on the two sides of the light and then put the light into the hole of the ceiling. The inside reed gore to the ceiling and then we press the lampshade and push the light up forcefully. Finally, we need to fix it tightly. Then, the installation process is finished.
Second, the replacement steps of the tube of embedded ceiling light.
Firstly, we can press the open position of lampshade softly, and the lampshade will open automatically. Then, we remove the lampshade.
Second, unplug the broken tube forcefully.
Thirdly, we can aim the four copper needle of the new tube at the socket and insert into it forcefully. Attention: the tube in different type have different situations
Fourthly, we need to put the lampshade on the lamp holder in the right direction and press it in the corresponding position forcefully. If we install the shade incorrectly, then the lampshade will fall down.
Second, the precaution of installing embedded ceiling light.
First, the ceiling light can not be installed on the combustible goods directly.
Some families put the painted plywood on the back of the ceiling light to make it look more beautiful, but it is very dangerous actually. We must take actions to insulate the heat. If the part of the surface which in high temperature is close to the combustible goods, then we also need to take actions to insulate the heat or dissipate the heat.
Besides, packing the connecting wire well.
The two threads which used to connect the power wire of ceiling light should have a good electrical contact. And we also need to pack it with black tape respectively and keep a certain distance. We should try our best to not put the two threads
under a metal sheet, or it will get a short circuit and become dangerous.
In addition, we should check it before installing the ceiling light.
The section of every wire core should be not less than 0.75mm2, or we must change the lead.
The connection between the lead and the head of the light, and the parallel wires should be fixed. It should get a good electric contact, or there will spark between the lead and terminal. It is very dangerous.
Finally, we need to ensure the safety.
We’d better tell kids not to throw balloon to the indoor light, or kids will get hurt if the pendant falls down.
And the decoration effect will be influenced greatly.
Here are the installation process and precautions of installing embedded ceiling light and I hope that it will be helpful for you. If you want to know more information, then you can pay close attention to Savelights. Savelights will provide you with more complete, detailed and newer information.
Decorative Tiffany ceiling lights accented by beautiful floral pattern in blue color. Glass shade protest E27 bulb base which is convenient for incandescent bulbs,energy-saving bulbs and LED bulbs.